燃氣冷、熱、電分布式能源系統的核心設備包括燃氣發電機組、吸收式冷(熱)水機組、余熱鍋爐等。燃氣發電機組設備包括各種水泵、閥門、冷卻塔、冷卻風機、配電柜等，如何使這些設備高效、節能、經濟地運行，控制系統是關鍵，那么，下面一起了解下燃氣發電機組控制系統設計要點!

The core equipment of the distributed energy system for gas cooling, heating, and electricity includes gas generator units, absorption cooling (heating) water units, waste heat boilers, etc. Gas generator set equipment includes various water pumps, valves, cooling towers, cooling fans, distribution cabinets, etc. How to make these equipment operate efficiently, energy-efficient, and economically is the key to the control system. So, let's learn about the key points of gas generator set control system design together!

燃氣發電機組在運行過程中產生兩種能量：電能和熱能。在實際應用中，對電能和熱能的需求是不斷變化的。通過排煙系統和冷卻水箱將其排放到空氣中。因此，在分布式能源項目中，項目的經濟可行性是一個重要的方面。必須了解項目的電力需求和熱需求，設計發電機組經濟的運行方案。

Gas generator sets generate two types of energy during operation: electrical energy and thermal energy. In practical applications, the demand for electrical and thermal energy is constantly changing. Discharge it into the air through the smoke exhaust system and cooling water tank. Therefore, in distributed energy projects, the economic feasibility of the project is an important aspect. It is necessary to understand the power and heat demands of the project and design an economical operation plan for the generator set.

當市場上電能的經濟性較好時，項目申請將以產生更多電能為主要目標進行設計，同時考慮很大限度地利用余熱。熱能過剩時排放到空氣中。在項目設計中，將以電來定熱;當熱能在項目應用中的經濟性能良好時，項目設計將滿足用戶所需的熱能為主要需求。在產生熱能的同時，項目中多余的電能將通過市電并網的方式輸送至城市電網。這就是火電的設計方法。此類項目申請需要與市電力部門協調，取得上網許可。在確定是用熱定電還是電定熱后，我們會根據需要設計合適的控制系統來控制燃氣發電機組的正常運行。

When the economy of electricity in the market is good, the project application will be designed with the main goal of generating more electricity, while considering the maximum utilization of waste heat. When there is excess heat energy, it is discharged into the air. In project design, electricity will be used to determine heat; When the economic performance of thermal energy in project applications is good, the project design will mainly meet the thermal energy needs of users. At the same time as generating thermal energy, the excess electrical energy in the project will be transmitted to the urban power grid through grid connection. This is the design method for thermal power. This type of project application requires coordination with the municipal power department and obtaining internet access permission. After determining whether to use thermal or electrical heating, we will design a suitable control system according to the needs to control the normal operation of the gas generator set.

燃氣冷熱電分布式能源項目控制系統一般分為四個功能模塊：顯示模塊、計算控制模塊、報警保護模塊和數據記錄模塊。

The control system of gas cooling, heating and power distributed energy projects is generally divided into four functional modules: display module, calculation control module, alarm protection module, and data recording module.

1)顯示模塊：現代設備都有自己的控制系統。任何單個設備都可以按照預先設定的工況自動運行。同時可將所有運行參數通過數據線上傳至上位機。燃氣冷熱電分布式能源項目控制系統顯示模塊將整個系統的所有設備進行概覽，通過屏幕直觀顯示所有設備的運行狀態和運行參數。

1) Display module: Modern devices have their own control systems. Any individual device can automatically operate according to pre-set operating conditions. At the same time, all operating parameters can be uploaded to the upper computer through a data cable. The display module of the distributed energy project control system for gas cooling, heating and power provides an overview of all equipment in the entire system, and visually displays the operating status and parameters of all equipment through the screen.

2)計算與控制模塊：主要通過傳感器計算系統的運行狀態。并根據項目要求設計所需的目標狀態。將系統的運行狀態與目標狀態進行比較后，發出調整命令。為保證功能的穩定性和準確性，建議控制系統采用雙閉環控制。

2) Calculation and control module: mainly calculates the operating status of the system through sensors. And design the required target states according to project requirements. After comparing the running state of the system with the target state, issue an adjustment command. To ensure the stability and accuracy of the function, it is recommended to use dual closed-loop control for the control system.

3)告警保護模塊：燃氣發電機組主要功能是當系統遇到危險狀態時發出告警，嚴重時自動關閉部分設備或停止整個系統，以保護系統免受更大的損害。系統自動停機的危險狀態有：水溫高、油壓低、超速、爆缸、漏氣等。4)數據記錄模塊：用于記錄系統運行的數據和參數，以及歷史報警記錄。通過記錄數據分析系統的支持狀態來計劃維護和保養。

3) Alarm protection module: The main function of a gas generator set is to issue an alarm when the system encounters a dangerous state, and in severe cases, automatically shut down some equipment or stop the entire system to protect the system from greater damage. The dangerous states of automatic shutdown of the system include high water temperature, low oil pressure, overspeed, cylinder explosion, air leakage, etc. 4) Data recording module: used to record system operation data and parameters, as well as historical alarm records. Plan maintenance and upkeep by recording the support status of the data analysis system.