1、通風

1. Ventilation

柴油發電機房的通風問題是機房設計中要特別注意解決的問題，特別是機房位于地下室時更要處理好，否則會直接影響柴油機發電機組的運行。機組的排風一般應設熱風管道有組織地進行，不宜讓柴油機散熱器把熱量散在機房?jī)?nèi)，再由排風機抽出。機房?jī)?nèi)要有足夠的新風補充。柴油機在運行時，機房的換氣量應等于或大于柴油機燃燒所需新風量與維持機房室溫所需新風量之和。維持室溫所需新風量由下式計算：C=0.078PT式中：C--需要的新風量（m3/s）P--柴油機額定功率（kW）T--機房溫升（°C）。

The ventilation problem of diesel generator room should be paid special attention to in the design of the machine room, especially when the machine room is located in the basement, otherwise it will directly affect the operation of diesel generator set. Generally, the exhaust of the unit shall be carried out in an organized way with hot air duct. It is not suitable for the heat of the diesel engine radiator to dissipate in the machine room and then be extracted by the exhaust fan. There shall be sufficient fresh air supplement in the machine room. When the diesel engine is running, the air exchange rate of the machine room shall be equal to or greater than the sum of the fresh air volume required for diesel engine combustion and the fresh air volume required to maintain the room temperature of the machine room. The amount of fresh air required to maintain room temperature is calculated by the following formula: C = 0.078pt, where: C -- the amount of fresh air required (m3 / s) P -- the rated power of diesel engine (kw) T -- the temperature rise of machine room (° C).

機房防塵不好，也會對設備產生危害，在保證機房通風的情況下，同時考慮到機房的防塵作用，加裝進風排風百葉，保證機房的風質和風量。

The poor dust prevention of the machine room will also harm the equipment. Under the condition of ensuring the ventilation of the machine room and considering the dust prevention effect of the machine room, the air inlet and exhaust louvers shall be installed to ensure the air quality and air volume of the machine room.

2、機房的附屬設施

2. Auxiliary facilities of machine room

如果機房雜亂無章，油管、電纜共同使用一個地槽；油箱、油管漏的到處都是油，機房?jī)?nèi)油霧很大；油桶、工具、掃帚、拖布，隨意擺放等等，讓人看了就不舒服其次也會帶來安全隱患。

If the machine room is disorderly, the oil pipe and cable use a trench together; The oil tank and oil pipe leak everywhere, and the oil mist in the machine room is very large; Oil drums, tools, brooms, mops, etc. are placed at will. First, they make people uncomfortable. Second, they will also bring potential safety hazards.

a、基礎

a. Foundation

機房防塵不好，也會對設備產生危害，在保證機房通風的情況下，同時考慮到機房的防塵作用，加裝進風排風百葉，保證機房的風質和風量。

The poor dust prevention of the machine room will also harm the equipment. Under the condition of ensuring the ventilation of the machine room and considering the dust prevention effect of the machine room, the air inlet and exhaust louvers shall be installed to ensure the air quality and air volume of the machine room.

b、機房接地

b. Machine room grounding

柴油發電機房一般應用三種接地：①工作接地：發電機中性點接地；②保護接地：電氣設備正常不帶電的金屬外殼接地；③防靜電接地：燃油系統的設備及管道接地。接地可以與建筑物的地采用聯合接地的方式。

Three kinds of grounding are generally used in diesel generator room: ① working grounding: generator neutral grounding; ② Protective grounding: the metal shell of electrical equipment that is normally uncharged is grounded; ③ Anti static grounding: equipment and pipeline grounding of fuel system. The grounding can be combined with the building grounding.

c、油箱

c. Oil tank

當機房設在高層建筑內時，日用油箱應設專用房間，用防火墻與柴油發電機隔開。盡量選用質量較好的標準型油箱，密封性好，不漏油，油箱應配有出油口，回油口、注油口、放油口、溢油口、油位顯示計，容積按機組連續工作12小時用油量選擇為妥。油箱密封性致關重要，否則漏油是令維護人員很頭痛的事。油霧過大會腐蝕橡膠、金屬等元件，而且還具有一定的危險性；油霧和灰塵粘附在機組及設備表面，很難清潔。

When the machine room is located in a high-rise building, the daily oil tank shall be provided with a special room separated from the diesel generator by a firewall. The standard oil tank with good quality shall be selected as far as possible, with good sealing and no oil leakage. The oil tank shall be equipped with oil outlet, oil return port, oil filling port, oil drain port, oil overflow port and oil level indicator. The volume shall be selected according to the oil consumption of the unit for 12 hours. The tightness of the oil tank is important, otherwise oil leakage is a headache for maintenance personnel. Excessive oil mist will corrode rubber, metal and other components, and it also has a certain risk; Oil mist and dust adhere to the surface of the unit and equipment, which is difficult to clean.